P10-30 Ccmt Carbide Inserts / Carbide Insert Cutting Tools HV2000
Ccmt Carbide Inserts advantages:
A. The tool life is high because the blade avoids the defects caused by high temperature of welding and grinding. The geometric parameters of the tool are entirely guaranteed by the blade and the tool bar groove. The cutting performance is stable and the tool life is improved.
B. High production efficiency, because the machine tool operators no longer grind the knives, can greatly reduce the downtime, tool change and other auxiliary time.
C. It is conducive to the promotion of new technology, new technology indexable knives and the promotion of the use of coatings, ceramics and other new tool materials.
D. It is helpful to reduce the cost of cutting tools because of the long service life of the tool rod, which greatly reduces the consumption and inventory of the tool rod, simplifies the management of the tool and reduces the cost of the tool.
Ccmt Carbide Inserts Parameters
| No. | Grade | Grade description | Grade(Competitors) |
| 1 | YBC152 | CVD coated P10–P20 carbide grade for finishing to medium operation of steel and casting steel. Outstanding performance under higher cutting speed and temperature with excellent wear resistance. | GC4315(), E6020(MITSUBISHI), T9125(TUNGALOY) |
| 2 | YB6315 | CVD coating grade combining nano dioxygen gradient transition techniques and crystal nucleus pre-insertion techniques. | GC4315(), T9115(TUNGALOY) |
| 3 | YBC252 | CVD coated P20–P35 carbide grade for medium operation to roughing of steel and casting steel. Optimal performance of wear resistance and toughness for a wide application field. | GC4325(),E6020(MITSUBISHI),T9125(TUNGALOY) |
| 4 | YBD102 | CVD coated K05–K20 carbide substrate. Optimized for medium operation of cast iron, special nodular cast iron and hard steel at high cutting speed. | UC5115(MITSUBISHI) |
| 5 | YBD152 | CVD coated K10–K25 carbide substrate. Optimized for medium to roughing operation of cast iron. Good wear resistance and toughness at higher cutting speed. | UC5115(MITSUBISHI) |
| 6 | YBD152C | Thick Al2O3 CVD coated K05–K25 carbide substrate. Optimized for medium to roughing operation of cast iron.Higher wear resistance and toughness at higher cutting speed in combination with TC chip breaker. | UC5115(MITSUBISHI) |
| 7 | YB7315 | CVD coated K10–K25 carbide substrate. Optimized for medium to roughing operation of cast iron. Improved wear resistance and toughness at high cutting speed. | UC5115(MITSUBISHI), WAK20() |
| 8 | YBM153 | CVD coated M10–M25 carbide grade for fnishing to medium application in stainless steel. High wear resistance and capability against plasctic deformation at higher cutting speed. | |
| 9 | YBM253 | CVD coated M15–M35 carbide grade for medium to roughing operation in stainless steel with wide application field. High wear resistance and capability against plasctic deformation at higher cutting speed. | |
| 10 | YBG202 | PVD coated M10–M25/P10–P30 carbide substrate for finishing to medium application of stainless steel and steel (milling). Good wear resistance in a wide application field. | |
| 11 | YBG205 | PVD multilayer coated M20–M40/S15–S25/P10–P30 carbide substrate for finishing to medium application of stainless steel, super alloy and steel (milling). Good wear resistance and thermal stability in a wide application field. | VP15TF(MITSUBISHI) |
| ... | ... | DON'T HESITATE TO CONTACT US TO GET MORE DETAILS! | ... |
YG3X 14.6-15.2 1320 92 is suitable for high speed finishing of small cutting sections of cast iron, non-ferrous metal and alloy quenched steel alloy steel.
YG6A 14.6-15.0 1370 91.5 is suitable for semi-finishing of hard cast iron, non-ferrous metals and their alloys, as well as semi-finishing and finishing of high manganese steel, quenched steel and alloy steel.
The production and application of
YG6X 14.6-15.0 1420 91 show that the alloy has good effect in processing cold-hard alloy cast iron and heat-resistant alloy steel, and is also suitable for surface treatment of ordinary cast iron.
YS2T 14.4-14.6 2200 91.5 belongs to superfine grain alloy. It is suitable for milling low-speed rough turning, heat-resistant alloy and titanium alloy. It is used as cutting tool, tap and saw blade milling cutter.
YT15 11.0-11.7 1150 91 is suitable for rough turning, semi-finishing turning and finishing turning in continuous cutting, small cross-section finishing turning in intermittent cutting, semi-finishing turning and finishing turning on continuous surface, rough and precise expanding of holes in processing of carbon steel and alloy steel.
YT5 12.5-13.2 1430 89.5 is suitable for rough turning, rough shaving, semi-fine shaving, rough grinding and drilling of discontinuous surfaces of carbon and alloy steels (including steel forgings, stamping parts and casting surfaces).
YS25 12.8-13.2 2000 91 is suitable for rough turning, milling and planing of carbon steel, cast steel, high manganese steel, high strength steel and alloy steel.
YT14 11.2-12.0 1270 90.5 is suitable for rough turning, rough turning and continuous cutting in the processing of carbon steel and alloy steel, semi-finish turning and precision turning in intermittent cutting, continuous rough turning, drilling and rough expansion of casting holes.
YW1 12.6-13.5 1180 91.5 is suitable for the processing of refractory steel, high manganese steel, stainless steel, common steel and cast iron.
YW2 12.4-13.5 1350 90.5 is suitable for finishing and semi-finishing of heat-resistant steel, high manganese steel, stainless steel and high alloy steel. Processing of common steel and cast iron.
YS30 12.45 1800 91.0 belongs to superfine grain alloy. It is suitable for efficient milling of various steel, especially alloy ste
| TYPE | L | 1.W | S | Φd |
| LNKT2510-ZR | 25 | 18 | 9.525 | 5.5 |
Our Service
Pre-sale Service:
We have professional sales staff, who can understand the details about your needs and offer feedback.
Sales Service:
After Placing order, our professional sales staff will communicate and work on the production schedules or your change of demand.
After-sale Service:
We will arrange the returning and changing of the products timely if they have quality problems. At the same time, return visits will be made regularly to know service situation of our products.
Product Tags:
|
|
SNMG120408R,P10-30 Ccmt Carbide Inserts / Carbide Insert Cutting Tools HV2000 Images
|
